Pipeline Transportation and Storage

Common Pipeline Transportation and Storage Hazards

Find the right MCR Safety product that protects you against these common hazards.


Abrasive Handling

Workers transport many materials and move a lot of drums constructing pipelines. Heavy-duty wearing gloves are all these workers require!

Learn More About Abrasive Handling Protection

Common Applications:

  • Material Moving workers transporting materials across worksites.

MCR Safety UltraTech® Mechanics Gloves CutPro® UltraTech® 13 Gauge HyperMax® Shell Red Sandy...

MCR Safety CutPro® 15-Gauge HyperMax® Shell Cut, Abrasion, and Puncture Resistant Nitrile Foam...

MCR Safety UltraTech® Mechanics Gloves CutPro® UltraTech® 13-Gauge HyperMax® Shell Gripping Latex...

Applying Herbicides and Pesticides

Pipeline maintenance requires spraying chemicals.  Our MG9648 is so lightweight; workers will not even know they are wearing gloves.

Learn More About Applying Herbicides and Pesticides Protection

Common Applications:

  • Maintenance workers, construction workers.

Ninja® Alchemy Cut Work Gloves Cut-Resistant and Chemical-Resistant TPR Back of Hand Provides...

PredaStretch™ Work Gloves 15-Gauge Cut-Resistant Synthetic Shell Full PVC Coating with Sandy...

Ninja® Alchemy Work Gloves 15-Gauge Nylon Shell Fully Double Coated with PVC TPR Back-of-Hand...

Asbestos and Coal Tar Pipe Coating

Hand removal of these materials requires gloves, aprons, and goggles.

Common Applications:

  • Material Moving workers.

Luminator® Insulated Leather Palm Work Gloves 2.5 Inch Rubberized Safety Cuff Hi-Visibility...

Concord Series .35mm Neoprene / Nylon Apron 35 Inch Wide x 45 Inch Length Sewn Edges Tested in...

Hydroblast­® HB3 Safety Goggles with Clear Lens MAX6® Anti-Fog Lens Coating Adjustable Elastic...

Chemicals

Chemicals are an everyday concern for Oil and Gas workers meaning workers need full protection. Our chemical protection page is a good place to start.

Learn More About Chemicals Protection

Common Applications:

  • Opening pipelines, adding dye, tank taping, and drawing water off tanks, handling PCB’s and tank cleaning. 

Ninja® Alchemy Cut Work Gloves Cut-Resistant and Chemical-Resistant TPR Back of Hand Provides...

14 Inch Butyl Rubber Glove 5 mil Smooth Finish Gauntlet Rolled Cuff Excellent Glove Protection...

Dominator Series Rain Gear .42mm PVC / Polyester / PVC Rainwear 2 Piece Waterproof Green Rain...

Hydroblast® HB2 Safety Goggles with Gray MAX6® Anti-Fog Lens Indirect Vented with Adjustable...

Crush and Impact

56% of all recordable Oil & Gas incidents in 2014 were attributed to "struck by" and "caught between” objects.  Simply put, oil and gas work will quickly bang up a worker’s back-of-hands.  Are you ready for the new impact standard?

Learn More About Crush and Impact Protection

Common Applications:

  • Valve Installers repairing devices, Operating portable equipment, removing pumps, seals and valves.

Predator® Insulated Mechanics Gloves Hi-Visibility Impact Resistant Work Gloves Tire Tread TPR on...

MCR Safety UltraTech® Mechanics Gloves Cut Pro® UltraTech® 13-Gauge Lime HyperMax® Shell Red...

MCR Safety UltraTech® Mechanics Gloves CutPro® UltraTech® 13-Gauge HyperMax® Shell 10-Gauge...

Cutting and Welding

Mainline and station piping requires welding gear at times.  Tie-in crews have no problem making the final welds at junctures and joining metal components on a pipeline.  They only require wearing MCR Safety welding gear!

Learn More About Cutting and Welding Protection

Common Applications:

  • Industrial Mechanics repairing broken metal parts, Pipe Welding.

MCR Safety Welding Gear Split Leather Welding Jacket 30 Inches Long Two Outer Sleeve Pockets One...

Mustang Utility Leather Work Gloves Grain Goatskin, Double Palm Sewn with DuPont™ Kevlar® 5 Inch...

Leather Welding Work Gloves Premium Top Grain Cowhide Palm, Split Leather Back 4 Inch Split...

MCR Safety Welding Premium Gold Grain Elkskin Leather Cotton / Foam Lined Back Sewn with DuPont™...

Dust

Midstream work generates some dusty conditions!  Lined eyewear styles are the ticket!

Learn More About Dust Protection

Common Applications:

  • Collecting spent abrasive blasting agents, construction work.

Swagger® RP2 Series Black Safety Glasses Gray Lenses MAX6® Anti-Fog Lenses Black Temples with...

Swagger® RP3 Series Black Foam Lined Safety Glasses Brown MAX6® Anti-Fog Lenses Interchangeable...

Swagger® RP2 Series Black Safety Glasses with Clear Lenses MAX36™ Anti-Fog / Anti-Scratch...

Fire and Explosion

Midstream workers must wear FR gear at all times.  Max Comfort FR gear protects workers from all too common Flash Fires.

Learn More About Fire and Explosion Protection

Common Applications:

  • Valve Installers lubricating mechanical parts, Gas Plant Operators monitoring flammable products.

Summit Breeze® Flame Resistant (FR) Work Shirt Navy 6.5-Ounce 88% Cotton 12% Nylon Material Long...

MCR Safety FR Gear  Flame Resistant FR Tan Work Pants 7 oz. 88% Cotton and 12% Nylon Twill...

MCR Safety FR Gear Flame Resistant FR Work Shirts Lightweight Long Sleeve T-Shirt Comfortable...

Summit Breeze® Flame Resistant (FR) Coverall Gray 7-ounce 100% Cotton Material Long Sleeve...

Heat Stress

Pipeline work in the hot sun can take a toll on workers.  Breathable safety gear is necessary when temperatures escalate.  We’ve got you covered with premier breathable PPE.

Learn More About Heat Stress Protection

Common Applications:

  • Construction work, Pipelayers.

Luminator® Series Hi-Vis Reflective Orange Safety Vest Manufactured with Recycled Materials Meets...

Luminator® Series Hi-Vis Safety Work T-Shirts Soft Polyester Birdseye Mesh Fabric Meets ANSI/ISEA...

Ninja® BNF Work Gloves 18 Gauge Nylon / Spandex Shell NFT® Palm and Fingertip Coated 47% Greater...

Luminator® Series Hi-Visibility Leg Gaiters Hook and Loop Closures Meets ANSI/ISEA 107 2020...

Impaired Vision

Form-fitting eyewear is essential gear for workers when flying debris and fragments are in the air.  Check out our eyewear protection page. 

Learn More About Impaired Vision Protection

Common Applications:

  • Chipping and hammering metal, working in high winds, cutting grass, using compressed air and welding.

Memphis MP1 Series Mossy Oak® Camo Safety Glasses Gray Lenses UV-AF® Anti-Fog Coating Wrap Around...

Memphis MP1 Series Black Safety Glasses with Gray G14 Lenses Wrap Around Lens Design Soft,...

Checklite® CL4 Series Safety Glasses with Gray Lens MAX6® Anti-Fog Lens Coating Earplug Retaining...

Inclement Weather and FR

Staying FR compliant in the rain and around liquids has always been a challenge.  Not anymore!  Big Jake rainwear protects workers from ARC flash hazards!

Learn More About Inclement Weather and FR Protection

Common Applications:

  • Working outside on the pipelines, splashes of oil-based drilling fluid.

MCR Safety FR Gear Flame Resistant Insulated Bomber Jacket Tan 100% Cotton Duck Outer Modacrylic...

Big Jake 2 Rainwear PVC / Meta-Aramid Fabric Flame Resistant Rain Jacket ANSI Class 3 High...

Big Jake® 2 PVC / Meta-Aramid Fabric Flame Resistant Elastic Waist Rain Pants ANSI 107 Class E...

Mustang Utility Leather Work Gloves Grain Goatskin Double Palm DuPont™ Kevlar® Lined and...

Liquid and Dropped Objects

You are going to need steel toed boots when working around the presence of water, chemical hazards, and falling objects.

Common Applications:

  • Repair and Maintenance workers handling tools, Material Moving workers transporting materials.

** Limited Sizes Available ** 6 Inch Black PVC Boots with Lace-Up Strings Steel Toe and Steel...

  **Notice** Effective 12/01/2023, please source all of your PVC footwear needs from Tingley...

Hydroblast Series Rain Gear .35mm Yellow PVC / Polyester Rain Wear 2 Piece Hydroblasting Rain...

Ninja® Alchemy Work Gloves 15-Gauge Nylon Shell Fully Double Coated with PVC TPR Back-of-Hand...

Oils, Lubricants and Greases

You need excellent gear when gripping in and around oily surfaces.  BNF gear provides ultimate grip in this environment.  

Learn More About Oils, Lubricants and Greases Protection

Common Applications:

  • Changing oil in pumps, greasing fitting and valves

Predator® Mechanics Gloves Hi-Visibility Impact Resistant Work Gloves Tire Tread TPR on Back,...

Ninja® BNF Work Gloves 18 Gauge Nylon / Spandex Shell Fully Coated with Red Flat Nitrile Black...

Ninja® BNF Evolution Work Gloves 15 Gauge Ingenia™ Shell NFT® Palm and Fingertip...

Pinch Points

Any time machinery is transmitting energy, protecting your fingers deserves real attention.  Are you ready for the new impact standard?

Learn More About Pinch Points Protection

Common Applications:

  • Changing parts, lubricating machines, operating pumping systems.

MCR Safety UltraTech® Mechanics Gloves Black Sandy Nitrile Foam Palm Fingertips TPR Back of Hand...

MCR Safety UltraTech® Mechanics Gloves CutPro® UltraTech® 13-Gauge HyperMax® Shell Black Sandy...

MCR Safety UltraTech® Mechanics Gloves CutPro® UltraTech® 13 Gauge Lime HyperMax® Shell Orange...

MCR Safety UltraTech® Mechanics Gloves CutPro® UltraTech® 13-Gauge HyperMax® Shell 10-Gauge...

Pigging

Launching a pig scraper to clean and maintain pipes exposes workers to benzene, toluene, and xylenes. Neoprene, Butyl, and PVC gloves are this worker’s best friend.

Learn More About Pigging Protection

Common Applications:

  • Maintenance Workers, Pump System Operators regulating the flow of oil.

14 Inch Butyl Rubber Glove 25 mil Smooth Finish Gauntlet Rolled Cuff Excellent Glove Protection...

PVC Coated Insulated Work Gloves Double Dipped Hi-Vis Orange PVC Sandy Texture and Foam...

Blue Coat® Series Flexible PVC Coated Work Gloves Triple Dipped with Textured Blue PVC Seamless...

Pipe Maintenance

Midstream workers know pipes are a part of the trade.  They only demand high quality protection when working around pipes.  MCR Safety has been manufacturing leather gloves for many years. Check out some of our latest innovations. 

Learn More About Pipe Maintenance Protection

Common Applications:

  • Repairing pipes, repairing cords, and replacing couples.

MCR Safety Welding Leather Welding Work Gloves Foam Lined Select Shoulder Leather Reinforced Wing...

Predator® Mechanics Work Gloves Impact Resistant Gloves Cowskin Leather Palm with D3O®...

MCR Safety CutPro® Leather Driver Cut Resistant Work Gloves Padded Double Palm with TPR...

Mustang Utility Drivers Work Gloves Grain Goatskin with Double Palm DuPont™ Kevlar® Lined and...

Sharp Objects

Midstream workers are always exposed to sharp metal.  Cuts and lacerations make up 7 percent of all oil and gas injury claims. Rest assured, we simplify the selection process on our cut protection page.

Learn More About Sharp Objects Protection

Common Applications:

  • Operating Dangerous Equipment, Sharp blade handling, sanding, grinding, and cutting pipe, along with checking vents.

MCR Safety CutPro® 18-Gauge HyperMax® Shell Cut, Abrasion, and Puncture-Resistant Polyurethane...

MCR Safety CutPro® 15-Gauge HyperMax® Shell Cut, Abrasion and Puncture Resistant Polyurethane...

Predator® Mechanics Gloves Goatskin Leather Drivers Work Gloves Tire Tread TPR on Back, Fingers,...

Predator® Mechanics Gloves Hi-Visibility Cut Resistant Work Gloves Tire Tread TPR on Back,...

Spill Response

Handling contaminated materials requires premium chemical gloves, goggles, FR rain suits, and full-face shields.

Learn More About Spill Response Protection

Common Applications:

  • Gas Plant Operators, Maintenance Workers.

Nitri-Chem™ Flock Lined Green Nitrile Gloves Industrial Grade 13 Inches in Length 15 mil...

Hydroblast­® HB3 Safety Goggles with Clear Lens MAX6™ Anti-Fog Lens Coating Adjustable Rubber...

Dominator Series Rain Gear .42mm PVC / Polyester / PVC Rainwear 2 Piece Waterproof Green Rain...

Flock Lined Gloves Blue Nitrile over Green Latex Industrial Grade 12 Inches in Length 28 mil...

Vacuum Excavating

Moving and removing soil with pressured water requires face shields, goggles and some nice leather gloves.

Common Applications:

  • Construction workers removing soil.

"XO Skeleton" Headgear Clear 1 Piece Molded Face Shield MAX6® Premium Anti-Fog CoatingMAX6®...

MCR Safety CutPro® Driver Leather Drivers Work Gloves Premium Grade Grain Goatskin Kevlar® and...

Hydroblast Series Rain Gear .35mm Yellow PVC / Polyester Rain Wear 2 Piece Hydroblasting Rain...

Hydroblast­® HB3 Safety Goggles with Gray Lens MAX6™ Anti-Fog Lens Coating Adjustable Rubber Head...

Visibility

Working in low light and high traffic areas means workers need to be seen!  Hi-Viz garments distinguish the worker and keeps them seen!

Learn More About Visibility Protection

Common Applications:

  • Working around busy highways and roadways, signal spotting, operating ATV’s.

Luminator® Series Hi-Vis Reflective Lime Safety Vest Manufactured with Recycled Materials Meets...

Luminator® Series Hi-Vis Reflective Orange Safety Vest Manufactured with Recycled Materials Meets...

Luminator® Series Premium Hi-Vis Reflective Safety Vest Zippered with Solid Front Mesh Back Meets...

Luminator® Series Hi-Vis Reflective Lime Safety Vest Surveyor Vest with 9 Pockets Sturdy Metal...

Contact MCR Safety Today

Ready to Learn More or Find a Distributor?

Need more information? Not finding what you need here? Tell us a little bit about you and we'll get right back to you to answer all your questions.

Ask us anything: Questions about an existing order, Make an order, Schedule an on-site assessment, Learn how to be a distributor, Find your closest distributor.

Just Try to Outwork Us!

By submitting this form I consent for MCR Safety to contact me for business and marketing purposes at the phone and/or email I provided via physical and/or automated methods. I understand I have the option to opt-out at any time. Visit www.mcrsafety.com/privacy for MCR Safety's privacy policy

MCR Safety Logo Why MCR Safety Products? MCR Safety Logo

MCR Safety manufactures and supplies Personal Protective Equipment (PPE). Simply put, WE PROTECT PEOPLE!  We are known world-wide for our extensive product line depth surrounding gloves, glasses, and garments spanning across numerous industries.  We offer the total package of safety gear encompassing industrial gloves, safety glasses, protective garments, welding gear, industrial boots, Flame Resistant (FR) gear, face shields, and much more.  From a glove standpoint alone, MCR Safety manufacturers and supplies over 1,000 different style gloves. Here are some of the many reasons MCR Safety is your go to source for PPE:

  • Global PPE manufacturer, with operations stretching across 5 continents. 
  • Direct manufacturer of over 50% of all product, ensuring the highest level of quality. 
  • In conjunction with quality control measures resulting from direct manufacturing, our ITC Innovations Technology Center ensures another layer of testing glove quality. The ITC Lab is the only ISO 17025 accredited lab to perform ANSI/ISEA 105-2016 cut resistance, abrasion resistance, puncture resistance, and conductive heat resistance testing in North America. We offer no cost testing for users interested in knowing the quality level of current PPE being worn or for potential new products being considered.
  • Winner of multiple new product innovation awards, most recently being the DM3 eyewear
  • Dedicated 360° Safety Specialists ready for onsite PPE consultations.

Click here and see for yourself and learn more why our customers love our gloves!

Oil & Gas Industry Safety Insights and Information


Tradeshows

Research Disclaimer

MCR Safety is recognized as a global manufacturer stretching across six countries, with both distribution and manufacturing facilities.  Our core competency and specialty is manufacturing and supplying protective gloves, glasses, and garments.  The information shown and provided on MCR Safety’s website, its safety articles, industry resource pages, highlighted hazards and safety equipment should be used only as a general reference tool and guide.  The end user is solely responsible for determining the suitability of any product selection for a particular application.  MCR Safety makes no guarantee or warranty (expressed or implied) of our products’ performance or protection for particular applications.