- Cut Level A5
- ANSI/ISEA 105:2020 Standard
- ASTM F2992-15 Cut Resistance Test Method
- Abrasion Level 3
- ANSI/ISEA 105:2016 Standard
- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves
- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves
- Puncture Level 3
- ANSI/ISEA 105:2016 Standard
- Puncture Resistance Test Method EN388
For applications less than 284 degrees Fahrenheit. Contact Heat Only, Not Direct Flame.
-Gloves Tested Palm Only-
ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance. Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.
This tear score was derived from the EN 388:2016 standard. The European Standard EN 388:2016 covers the test requirements for safety gloves that are provided to protect against mechanical risks.
13 Gauge
Yes
Goat
No
Wing
No
A5
3
3
2
No
2
2
2
2
Gauntlet
No
Grain
White and Blue
Leather
Large
Standard
Full Back
Premium
6
30.276
5.046
Polybag 12
Kevlar® is a trademark of DuPont™ used under license by MCR Safety Inc.