MCR Safety Carbon Fiber

92737

 New

MCR Safety Cut Pro®
13 Gauge HyperMax™ Shell
Cut, Puncture and Abrasion Resistant Work Gloves
Clear Silicone Coated Palm and Fingertips


Cut resistance with excellent gripping power

Details

MCR Safety Cut Pro™ offers cut resistant options that are comfortable and easy to wear. The 92737 features a seamless 13-gauge HyperMax™ shell with a durable clear silicone coated palm and fingertips. The advantages to a silicone palm versus other polymers include the fact that it is naturally antimicrobial and is hypoallergenic.  The 92737 provides great abrasion and cut resistance while the silicone palm adds superior gripping power, making it a great choice for tough jobs. Looking for the best cut resistant gloves?  Look no further than MCR Safety's Cut Pro® cut resistant options.
  • 13-gauge green HyperMax™
  • Flexible which limits hand fatigue 
  • Clear Silicone Palm Dip
  • Unmatched gripping power on dry surfaces
  • Naturally Anti-Microbial
  • Silicone is an inert substance. It is this property that makes this material desirable to industries such as health care [catheter tubes, implants, etc.], electrical, etc. = Silicone does not support growth of microorganisms so it is naturally antimicrobial.
  • Silicone Coating is Allergen Free - is this same property that makes this material hypoallergenic as well, This is the reason that Silicone is a material of choice for cosmetics.
  • Zero Absorption - If the Silicone coating becomes wet you can wipe it off and return the glove to service unlike Nitrile which absorbs
Glove Size Part No.
X - Small 92737XS
Small 92737S
Medium 92737M
Large 92737L
X - Large 92737XL
XX - Large 92737XXL

Performance Standards

ANSI Puncture
3
ANSI Abrasion
6
ANSI Cut
A3
ANSI Contact Heat
1 - Less than 176°F

Brand


The most powerful cut protection brand in the industry representing the best of the best in fibers and coatings.

WARNING:
THIS PRODUCT IS CUT RESISTANT, NOT CUT PROOF.  DO NOT USE WITH OR AROUND MOVING EQUIPMENT, TOOLS OR MATERIAL.

Gauge


Knitted Gloves are made with yarn that range from 7 gauge to 18 gauge.  The lower the gauge of a yarn the thicker the glove will be.  The higher the yarn’s gauge the thinner the glove will be, which allows for ultimate dexterity.

Material


HyperMax synthetic yarns are engineered to protect against cuts and lacerations ranging from ANSI Cut Level A2 up to A9.  Excellent abrasion properties and high levels of comfort are key to the success of this fiber.

WARNING:
THIS PRODUCT IS CUT RESISTANT, NOT CUT PROOF.  DO NOT USE WITH OR AROUND MOVING EQUIPMENT, TOOLS OR MATERIAL.

ANSI Contact Heat


Level 1

For applications less than 176 degrees Fahrenheit.

ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance.  Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.

ANSI Cut


- ANSI Cut Level A3

- ANSI/ISEA 105:2016 Standard

- ASTM F2992-15 Cut Resistance Test Method

WARNING:
THIS PRODUCT IS CUT RESISTANT, NOT CUT PROOF.  DO NOT USE WITH OR AROUND MOVING EQUIPMENT, TOOLS OR MATERIAL.

ANSI Abrasion


- ANSI Abrasion Level 6

- ANSI/ISEA 105:2016 Standard

- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves

- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves

ANSI Puncture


- ANSI Puncture Level 3

- ANSI/ISEA 105:2016 Standard

- Puncture Resistance Test Method EN388

Cut Protection


ANSI/ISEA 105 2016
ASTM F1790 – 05 vs. ASTM F2992 – 15 Test Method for Cut Resistance

ANSI Cut Guide

 

CutPro


MCR Safety CutPro

Every day consists of change and improvement so at MCR Safety we are living this out by updating the most powerful cut protection offerings in the industry with a single brand that represents the best of the best in fibers, coatings, and technology advancements as CUTPRO. One unified brand identity along with an easy identifiable ANSI cut scoring system.

Technical Specifications

Material
Hypermax
Palm/Polymer Type
Silicone
Gauge
13 Gauge
ANSI Puncture
3
ANSI Abrasion
6
ANSI Cut
A3
ANSI Contact Heat
1 - Less than 176°F
Hi-Vis color
Green
Hem Color
White
Cuff Material
Knitted
Cuff Style
Knit Wrist
Glove Size
Large
Brand
CutPro
Case Dimensions
23.622 x 16.142 x 12.205
Case Pack
12
Case Weight
31.680 lb.
Gross Weight
2.640
 WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov/product
Learn More
 WARNING:
THIS PRODUCT IS CUT RESISTANT, NOT CUT
PROOF.  DO NOT USE WITH OR AROUND
MOVING EQUIPMENT, TOOLS OR MATERIAL.

Contact MCR Safety Today

Ready to Learn More or Find a Distributor?

Need more information? Not finding what you need here? Tell us a little bit about you and we'll get right back to you to answer all your questions.

Ask us anything: Questions about an existing order, Make an order, Schedule an on-site assessment, Learn how to be a distributor, Find your closest distributor.

Just Try to Outwork Us!

By submitting this form I consent for MCR Safety to contact me for business and marketing purposes at the phone and/or email I provided via physical and/or automated methods. I understand I have the option to opt-out at any time. Visit www.mcrsafety.com/privacy for MCR Safety's privacy policy