MCR Safety Carbon Fiber

9378E

MCR Safety Cut Pro® 
Made with DuPont™ Kevlar®
Competitive Value (CV) 
18 Inch Sleeve


DuPont™ Kevlar® Sleeve

Details

When the job calls for protection from cuts and scrapes Kevlar® sleeves step up. Our sleeves are constructed of Certified DuPont™ Kevlar®. The 9378E is a Competitive Value (CV) grade 18 inch Kevlar® sleeve with no thumb slot.
  • 18 inch sleeve made of Certified Dupont™ Kevlar® fiber
  • Will not melt, ignite or conduct electricity
  • Certified by DuPont™ as a licensed manufacturer
  • High comfort level

Performance Standards

ANSI Abrasion
2
ANSI Cut
A3
ANSI Contact Heat
3 - Less than 392°F

CE TEAR


This tear score was derived from the EN 388:2016 standard.  The European Standard EN 388:2016 covers the test requirements for safety gloves that are provided to protect against mechanical risks.

WARNING:
THIS PRODUCT IS TEAR RESISTANT, NOT TEAR PROOF.  DO NOT USE WITH OR AROUND MOVING EQUIPMENT, TOOLS OR MATERIAL.

Brand


The most powerful cut protection brand in the industry representing the best of the best in fibers and coatings.

WARNING:
THIS PRODUCT IS CUT RESISTANT, NOT CUT PROOF.  DO NOT USE WITH OR AROUND MOVING EQUIPMENT, TOOLS OR MATERIAL.

Gauge


Knitted Gloves are made with yarn that range from 7 gauge to 18 gauge.  The lower the gauge of a yarn the thicker the glove will be.  The higher the yarn’s gauge the thinner the glove will be, which allows for ultimate dexterity.

Material


Kevlar® is the original gold standard in cut protection. Ideal for applications requiring cut and heat protection in one. Patented Kevlar® engineered yarns combine cut-resistant soft-spun Kevlar® materials, high-strength inorganic yarns and elastic stretch-core yarns to deliver the best balance of protection and comfort.

ANSI Contact Heat


Level 3

For applications less than 392 degrees Fahrenheit.

ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance.  Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.

ANSI Cut


- ANSI Cut Level A3

- ANSI/ISEA 105:2016 Standard

- ASTM F2992-15 Cut Resistance Test Method

WARNING:
THIS PRODUCT IS CUT RESISTANT, NOT CUT PROOF.  DO NOT USE WITH OR AROUND MOVING EQUIPMENT, TOOLS OR MATERIAL.

ANSI Abrasion


- ANSI Abrasion Level 2

- ANSI/ISEA 105:2016 Standard

- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves

- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves

Cut Protection


ANSI/ISEA 105 2016
ASTM F1790 – 05 vs. ASTM F2992 – 15 Test Method for Cut Resistance

ANSI Cut Guide

 

CutPro


MCR Safety CutPro

Every day consists of change and improvement so at MCR Safety we are living this out by updating the most powerful cut protection offerings in the industry with a single brand that represents the best of the best in fibers, coatings, and technology advancements as CUTPRO. One unified brand identity along with an easy identifiable ANSI cut scoring system.

Technical Specifications

Material
Kevlar
Gauge
7 Gauge
ANSI Abrasion
2
ANSI Cut
A3
ANSI Contact Heat
3 - Less than 392°F
Made in USA
No
Fabric Color
Yellow
Hemmed
Yes
Overall Length
18 in.
Brand
CutPro
Packaging - Inner Pack
Polybag 12
Case Pack
200
Case Dimensions
18.504 x 12.598 x 10.630
Case Weight
14.200 lb.
Gross Weight
0.071
 WARNING:
THIS PRODUCT IS CUT RESISTANT, NOT CUT
PROOF.  DO NOT USE WITH OR AROUND
MOVING EQUIPMENT, TOOLS OR MATERIAL.

Kevlar® is a trademark of DuPont™ used under license by MCR Safety Inc.

 WARNING:
THIS PRODUCT IS TEAR RESISTANT, NOT TEAR
PROOF.  DO NOT USE WITH OR AROUND
MOVING EQUIPMENT, TOOLS OR MATERIAL.

Contact MCR Safety Today

Ready to Learn More or Find a Distributor?

Need more information? Not finding what you need here? Tell us a little bit about you and we'll get right back to you to answer all your questions.

Ask us anything: Questions about an existing order, Make an order, Schedule an on-site assessment, Learn how to be a distributor, Find your closest distributor.

Just Try to Outwork Us!

By submitting this form I consent for MCR Safety to contact me for business and marketing purposes at the phone and/or email I provided via physical and/or automated methods. I understand I have the option to opt-out at any time. Visit www.mcrsafety.com/privacy for MCR Safety's privacy policy