MCR Safety is proud to expand our ForceFlex® line of gloves. We are the first to offer D3O® technology protection both in the palm and back of hand in mechanics gloves. The shock-absorbing properties of the D3O® material outperform similar materials and are thinner, allowing full flexibility and range of motion. Testing confirms the following:
On average, MCR Safety D3O® impact gloves are 29% thinner than competitors Impact Level 2 gloves.
On average, MCR Safety D3O® impact gloves offer 20% more impact dissipation than other impact gloves with the same height.
Our FF2931 ForceFlex® series was created in the oil and gas fields specifically to provide greater grip in dry, wet, and oily conditions. Distinguishing characteristics of these gloves include a two-way spandex back, hybrid fourchettes and reinforced thumb crotch for greater durability, HyperMax® lining to achieve an A5 cut level, and expansion gussets for easier donning and doffing. Additional features are the slip-on cuff with gusset, pull tab, and ID panel for personalization. Looking for the best mechanics work gloves? Look no further than MCR Safety!
- Cut Level A5
- ANSI/ISEA 105:2020 Standard
- ASTM F2992-15 Cut Resistance Test Method
ANSI/ISEA 138 Impact Standard
Gloves with the Impact Level 2 rating can transmit up to and including ≤6.5 kN of mean transmitted force to the back of the hand.
- Abrasion Level 4
- ANSI/ISEA 105:2016 Standard
- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves
- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves
- Puncture Level 5
- ANSI/ISEA 105:2016 Standard
- Puncture Resistance Test Method EN388
For applications less than 392 degrees Fahrenheit. Contact Heat Only, Not Direct Flame.
-Gloves Tested Palm Only-
ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance. Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.
Impact safety is paramount. The new ANSI ISEA 138 Impact Protection Standard makes selecting the right impact protection gear for the job easier than ever before.
The new standard establishes the performance requirements for safety gear designed to protect your hands from impact and crush.
MCR Safety Impact Protection gear conforms to these standards. Learn more about which level of protection you need from our Impact Protection information and review the entire line of MCR Safety products.
Synthetic
Polyurethane
Wing
A5
2
4
5
3
Slip-On - Open
Yes
Suede Synthetic
Black
Tan
Aqua Blue
Spandex
Large
Standard
Mesh
Woven
Premium
72
35.856
Polybagged by the pair
0.498
Hangtag
Polybag by Pair
Inner Box 12
