The PredaStretch™ MG9645 features has a 18 gauge cut resistant synthetic shell with a PVC nitrile bi-polymer double dip. The first layer is constructed with a red PVC nitrile bi-polymer, while the second layer is a black sandy finish PVC nitrile bi-polymer. The sandy texture on the outer coating will help increase the gripping power of this glove. This flexible 18 gauge shell combined with the flexible bi-polymer coatings provide excellent dexterity, fit, and feel when compared to similar style cut resistant gloves. The 12 Inch gauntlet cuff provides additional coverage and protection. Looking for the best PVC nitrile work gloves? Look no further than MCR Safety!
- ANSI Abrasion Level 5
- ANSI/ISEA 105:2016 Standard
- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves
- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves
- ANSI Cut Level A4
- ANSI/ISEA 105:2016 Standard
- ASTM F2992-15 Cut Resistance Test Method
- ANSI Puncture Level 3
- ANSI/ISEA 105:2016 Standard
- Puncture Resistance Test Method EN388
For applications less than 176 degrees Fahrenheit. Contact Heat Only, Not Direct Flame.
ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance. Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.
Fiber glass
Bi-Polymer
Yes
No
No
18 Gauge
No
4
X
3
2
5
A4
3
1 - Less than 176°F
Gauntlet
13 in.
Nitrile - Vinyl
Large
Single Dip
MCR Safety
6
44.700
Polybag 12
7.450
