This FR Glove has an Arc rating of 24.7 Cal/cm2
Whether you’re prepping a tie off or wrangling a transmission pole, you will need a glove that works as hard as you do. The men and women of the utility industry are the most dependable workers in the world. That is why they rely on an industry leader to provide the best protection for them. The top grain leather of the MCR Safety Mustang Utility field glove offers the dexterity that allows you to feel what you’re working with and holds up to the abrasion better than split leather. The MU3624GFR features a premium brown goatskin leather which remains soft and comfortable during sweaty conditions. Strategically positioned second layers of premium brown goatskin in the palm, fingertips, thumb crotch, index finger and knuckle provide additional protection without sacrificing dexterity. It is double stitched with DuPont™ Kevlar® thread on all stitch lines to provide longer wear life and to prevent seam blowout and features a Kevlar® lining. The MU3624GFR has an arc rating of 24.7 cal/cm2 and a Heat Attenuation Factor (HAF) of 91.3%. The Nomex® on the back of the hand for greater comfort and breathability. This field glove will provide all day protection and comfort to get the job done.
Glove Size | Part No. |
---|---|
Medium | MU3624GFRM |
Large | MU3624GFRL |
X - Large | MU3624GFRXL |
For applications less than 392 degrees Fahrenheit.
ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance. Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.
- ANSI Cut Level A4
- ANSI/ISEA 105:2016 Standard
- ASTM F2992-15 Cut Resistance Test Method
- ANSI Abrasion Level 4
- ANSI/ISEA 105:2016 Standard
- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves
- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves
- ANSI Puncture Level 4
- ANSI/ISEA 105:2016 Standard
- Puncture Resistance Test Method EN388
Every day consists of change and improvement so at MCR Safety we are living this out by updating the most powerful cut protection offerings in the industry with a single brand that represents the best of the best in fibers, coatings, and technology advancements as CUTPRO. One unified brand identity along with an easy identifiable ANSI cut scoring system.
MCR Safety Mustang Premium Leather Gloves offer unparalleled protection, comfort and enhanced performance. Various models are sewn with DuPont™ Kevlar® making them work as hard as you do.
Industry leading Mustang gloves offer dexterity while not compromising on cut and abrasion protection.
What about crush and impact? We have that too! Certain models have TPR back of hand protection to prevent impact & crush injuries.
Be sure to check out the full line today.
Kevlar® is a trademark of DuPont™ used under license by MCR Safety Inc.