MCR Safety has the perfect welders glove to fit your individual needs. The 4500 welders glove features premium select shoulder leather, has a 13 inch 1 piece back, is welted and lined and has an inner foam lining. It also features a wing thumb and has leather reinforced thumb crotch and palm area. Sewn with Dupont™ Kevlar® thread. Size XXL = 18 Inches.
- ANSI Abrasion Level 4
- ANSI/ISEA 105:2016 Standard
- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves
- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves
- ANSI Puncture Level 4
- ANSI/ISEA 105:2016 Standard
- Puncture Resistance Test Method EN388
For applications less than 392 degrees Fahrenheit. Contact Heat Only, Not Direct Flame.
-Gloves Tested Palm Only-
ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance. Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.
Yes
Cow
No
Wing
No
4
4
3
No
Yes
13 in.
Foam
Blue
1.1 - 1.6 mm
Leather
X - Large
Standard
Full Back
Select
6
67.554
11.259
Polybag 12
Kevlar® is a trademark of DuPont™ used under license by MCR Safety Inc.
