MCR Safety takes pride in manufacturing a diverse range of MIG/TIG welding gloves to suit various needs. With different styles, sizes, and leather options available, finding the perfect pair for your specific applications is simple. Our 4952 gloves are sewn with DuPont™ Kevlar® thread, offering exceptional resistance to sparks and sharp metals, ensuring durability and longevity. Designed for low-heat welding, these gloves prioritize optimal dexterity, allowing for precise attention to detail. Featuring quality select grade grain cow leather, a 4-inch russet split gauntlet cuff, and a wing thumb design, our 4952 gloves deliver outstanding performance. For best welding glove options, choose MCR Safety for all your welding glove needs!
- Abrasion Level 4
- ANSI/ISEA 105:2024 Standard
- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves
- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves
- Puncture Level 3
- ANSI/ISEA 105:2024 Standard
- Puncture Resistance Test Method EN388
For applications less than 284 degrees Fahrenheit. Contact Heat Only, Not Direct Flame.
-Gloves Tested Palm Only-
ANSI/ISEA 105:2024 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance. Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.
No
Cow
No
Wing
No
4
3
2
No
Gauntlet
No
Beige and Russet
0.8 - 1.3 mm
Leather
Large
Standard
Full Back
Select
6
30.228
5.038
Polybag 12
Kevlar® is a trademark of DuPont™ used under license by MCR Safety Inc.
