When your tough jobs present cut and scrape hazards, sleeves made with DuPont™ Kevlar® fibers offer outstanding protection. These MCR Safety CutPro® sleeves are constructed with certified DuPont™ Kevlar® brand fibers and are comfortable and easy to wear throughout the day. The 9378TE sleeve is 18-inches in length and has a comfortable thumb slot. Sleeves can be worn with gloves for additional arm protection. Looking for the best cut-resistant sleeves? Look no further than MCR Safety!
- Cut Level A3
- ANSI/ISEA 105:2024 Standard
- ASTM F2992-15 Cut Resistance Test Method
This tear score was derived from the EN 388:2016 standard. The European Standard EN 388:2016 covers the test requirements for safety gloves that are provided to protect against mechanical risks.
- Abrasion Level 2
- ANSI/ISEA 105:2024 Standard
- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves
- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves
For applications less than 392 degrees Fahrenheit. Contact Heat Only, Not Direct Flame.
-Gloves Tested Palm Only-
ANSI/ISEA 105:2024 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance. Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.
ANSI/ISEA 105 2016
ASTM F1790 – 05 vs. ASTM F2992 – 15 Test Method for Cut Resistance
Every day consists of change and improvement so at MCR Safety we are living this out by updating the most powerful cut protection offerings in the industry with a single brand that represents the best of the best in fibers, coatings, and technology advancements as CUTPRO. One unified brand identity along with an easy identifiable ANSI cut scoring system.
A3
2
3
No
Yes
18 in.
Yellow
200
15.400
0.077
Polybag 12
