SBC1012

The Safest FR Clothing in the World!
Summit Breeze® Flame Resistant (FR) Coverall
Navy 5.5-ounce Inherent Blend Material
Long Sleeve with Vented Underarms and Back
1-Inch Silver Reflective Stripes, CAT 2
ASTM F1930 Tested - Less Than 8% Body Burn!
Patented Underarm and Back Vents, the ultimate solution for comfort, protection, and heat stress.

Details
MCR Safety FR Clothing powered by Summit Breeze® Technology is the wave of the future when it pertains to protecting the workforce against flash fire and arc flash hazards. This product provides superior protection by incorporating our patented triple vent technology into our coveralls and shirts which protects the user on multiple levels.  Data from the American Burn Institute proves inhalation injury increases the mortality rate from flash fire significantly.  The Summit Breeze vented design keeps the wearer cooler, decreasing the chances of heat stress while also redirecting a majority of the off gas away from the breathing zone during a flash fire or arc flash event.  Looking for the best flame resistant FR coverall options?  Look no further than MCR Safety!
  • 1 Inch FR silver reflective stripes on arms and legs
  • 2 Chest flap pockets with zippered closure
  • 2-way FR zipper front
  • 5.5-ounce Inherent Blend Material
  • Adjustable two snap closure on each sleeve cuff
  • ASTM 1930 Tested, Certified
  • ASTM F1506 Electric Arc Protection, ATPV 8.9 cal/cm2, CAT2
  • Available in Gray, Navy, Tan, Red, and Royal Blue
  • Dual left and right front hip pockets, each with pass through pocket
  • Elastic waist back for movement and fit
  • Lay down collar with hook and loop tab for stand-up option
  • Mesh Gas Monitor pocket on right chest
  • NFPA 2112 UL Certified, NFPA 70E
  • Patented Triple Vent Technology
  • Pencil pocket on left sleeve
  • Tool pocket on right leg
  • Triple needle stitched with Nomex® thread in high wear areas for durability
  • Two roomy back hip pockets
DOWNLOAD SPEC SHEET
FR Garments Care and Maintenance
Recommendations for caring for your FR Garments
Download
Summit Breeze® FR Clothing
Flame Resistant (FR) Clothing Powered by Summit Breeze® Technology
Download
Summit Breeze® Sizing Charts
Summit Breeze® FR Clothing
Sizing Charts
Download
Sizing Type Part No.
Regular SBC101250
Regular SBC101252
Regular SBC101248
Regular SBC101258
Regular SBC101262
Regular SBC101250T
Regular SBC101240
Regular SBC101254
Regular SBC101244
Regular SBC101242
Regular SBC101260
Regular SBC101264
Regular SBC101256
Regular SBC101246
Regular SBC101238
Tall SBC101262T
Tall SBC101240T
Tall SBC101238T
Tall SBC101254T
Tall SBC101256T
Tall SBC101260T
Tall SBC101252T
Tall SBC101248T
Tall SBC101264T
Tall SBC101246T
Tall SBC101242T
Tall SBC101244T
Tall SBC101258T

Cape Vented

Garments with a cape vented back are constructed in such a way as to to allow air flow in and out of the garment, keeping the wearer cooler in warm environments.  The opening that allows air flow is covered by a protective flap, or cape, that prevents hazards from entering the garment.

UL Certified

These items are Third Party Certified by UL, a world leader in product safety and testing certification.

Hazard Risk Category

CAT Rating 2 (CAT2) - Minimum Arc Rating of 8.0 cal/cm2

Series

Patented Summit Breeze® Series Technology offers mesh venting that is incorporated onto the back and under the arms. This Triple Vent construction helps keep the wearer much cooler in warmer environments.

NFPA 70E-2018 Certified

Standard for Electrical Safety in the Workplace®

NFPA 2112-2018 Certified.

Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire.

Summit Breeze® Vented Garments


The world's safest FR Clothing powered by Summit Breeze®!

                     

Patented Tripe Vent Design Reduces Heat Stress

Only MCR Safety FR Clothing, powered by Summit Breeze®
technology, directs a majority of gas away from the face,
significantly minimizing inhalation injury!  Watch the video on
the right to see a Summit Breeze® garment tackle the mannequin
burn test!  ==> 

Technical Specifications

Fabric Type

Woven

Color

Navy Blue

Flame Resistant

Yes

ASTM F1506 Cert.

Yes

ASTM 1930 Cert.

Yes

NFPA 70E-2018 Certified

Yes

NFPA 2112-2018 Certified.

Yes

Case Pack

12

Case Weight

28.548

Contact MCR Safety Today

Ready to Learn More or Find a Distributor?

Need more information? Not finding what you need here? Tell us a little bit about you and we'll get right back to you to answer all your questions.

Ask us anything: Questions about an existing order, Make an order, Schedule an on-site assessment, Learn how to be a distributor, Find your closest distributor.

Just Try to Outwork Us!

By submitting this form I consent for MCR Safety to contact me for business and marketing purposes at the phone and/or email I provided via physical and/or automated methods. I understand I have the option to opt-out at any time. Visit www.mcrsafety.com/privacy for MCR Safety's privacy policy