From wranglin' to buildin', these gloves are tough for the job! Cowhide is the most commonly used leather due to availability. Characteristics include a good balance between abrasion resistance, dexterity, durability and comfort. The 3200 drivers gloves feature; unlined premium cow grain leather, shirred elastic back, rolled leather hemmed, and a keystone thumb pattern. (Available in vending packaged option - VP3200).
- ANSI Abrasion Level 4
- ANSI/ISEA 105:2016 Standard
- Abrasion Resistance Test Method ASTM D3389-15 for Coated Gloves
- Abrasion Resistance Test Method ASTM 3884-09 for Uncoated Gloves
- ANSI Puncture Level 3
- ANSI/ISEA 105:2016 Standard
- Puncture Resistance Test Method EN388
For applications less than 284 degrees Fahrenheit. Contact Heat Only, Not Direct Flame.
-Gloves Tested Palm Only-
ANSI/ISEA 105:2016 Standard, ASTM F1060 - 18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance. Conductive heat ratings measure the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds.
Whether your a welder, oil rigger, utility linesman, construction worker, or other professional, we have over 280 leather work glove options to meet your needs. Trust MCR Safety for the best leather work gloves for your personal protection!
No
Cow
Leather
No
Keystone
No
4
3
2
No
MCR Safety
Slip-On - Open
Yes
Grain
Unlined
Driver
Beige
1.0 - 1.6 mm
Leather
Large
Standard
Full Back
Premium
10
39.310
Polybag 12
3.931
